The office and classroom furniture arrangement comprises three key panels with several sub-categories:
In accordance with Western Australian Procurement Rules, you can buy outside of this CUA and directly source from an Australian Disability Enterprise (ADE) or Aboriginal Business
The General Conditions of Contract December 2016 applies to this arrangement.
This CUA is non-mandatory for public authorities.
Category A
Show moreContractors appointed to this panel are approved to supply the following categories of furniture as outlined in their online catalogue:
- Office /administration tables
- Office / administration chairs
- Reception furniture and soft furnishings
- Screening and sound reduction panels
- Storage furniture.
A range of colours and upholstery may be ordered from the contractor’s approved commercial range. These may attract an additional cost and should be confirmed with the supplier when placing an order.
Standards
Customers are encouraged to confirm the length of warranties applicable to a product before the purchase is completed. Customers are able to seek extended warranties from contractors if desired.
Customers are also encouraged to seek official certification from contractors which confirms that the offered products meet relevant standards. Office chairs made available through this CUA meet a range of standards, including but not limited to:
- Office Chairs Executive Chairs, General Seating
- AS/NZS 4438:1997 (R2016)/Amdt 1:1999 – standards for height adjustable swivel chairs.
- AFRDI 6 - ergonomic, strength, durability, stability, flammability and safety standards as a minimum.
- Heavy Capacity Chairs
- Safe Work Load testing certificate if possible or engineering report confirming load capacity must be supplied with all Heavy Capacity Chairs.
- Bariatric (300kg+) chairs.
- AFRDI Standard 151 (300 compliance) or equivalent - - Defines standards for ergonomic, strength, durability, stability, flammability and safety standards.
- Visitor Chairs
- AS/NZS 4688:2000 –fixed height chairs.
- AFRD 4 - Defines standards for ergonomic, strength, durability, stability, flammability and safety standards when fully assembled, as a minimum.
- Café Chairs
- AS/NZS 4688:2000 (R2016) and/or AS/NZS 3813:2016 Defines standards for Café chairs.
Office furniture on offer includes:
Office / administration tables
- Tables and desks
- Workstations (fixed and height adjustable)
All colours and finishes should be confirmed with the supplier when placing an order.
Office / administration chairs
- Office chairs
- Adjustable office chair
- Drafting chairs
- Stools
- Café chairs
- Executive chairs
- General seating
- Heavy capacity chairs
Reception furniture and soft furnishings
- Reception desks
- Lounges
- Visitor chairs, armchairs
- Coffee and side tables
- Ottomans
- Café chairs
Screening and sound reduction panels
- Privacy screening
- Acoustic panels
All colours and finishes should be confirmed with the supplier when placing an order.
Storage furniture
- Open shelving units, bookcases, stationary cupboards and pigeon holes
- Credenzas, mobile caddys, mobile pedestals and lockable cabinets
- Filing cabinets and lockers
- Library shelving - bookcases, bay end panels, rolling storage, mobile shelving (e.g. compactus-type), magazine shelving, book displays.
Category B
Show moreContractors appointed to this panel are approved to supply the following categories of furniture as outlined in their online catalogue:
- Primary and secondary school desks
- Primary and secondary school chairs
- Higher education desks
- Higher education chairs and stools
- Specialised learning furniture
- Storage furniture
Standards
Customers are encouraged to confirm the length of warranties applicable to a product before the purchase is completed. Customers are able to seek extended warranties from contractors if desired.
Customers are also encouraged to seek official certification from contractors which confirms that the offered products meet relevant standards. Classroom Furniture made available through this CUA meets a range of standards, including but not limited to:
- EN 1729:1 – dimensions, stability, strength and durability of chairs and tables for educational institutions
- EN 1729:2 or AS/NZS 4610 - furniture safety requirements and standards.
Other desirable ratings:
- GECA – environmental sustainability certification standards.
- AFRDI - .ergonomic, strength, durability, stability, flammability and safety standards
Ergonomic Assessment (e.g. CAA, APA) – Endorsed products by the Chiropractors Association of Australia and Australian Physiotherapy Association.
Classroom furniture on offer includes:
Primary and secondary school desks
- School teacher and student desks
- Student computer desks
- General purpose tables and technical drawing benches
Primary and secondary school chairs
- School teacher and student chairs and stools
- Student computer chairs
Higher education desks
- Student desks
- Student computer desks
- General purpose tables and technical drawing benches
Higher education chairs and stools
- School teacher and student chairs and stools
- Student computer chairs
Specialised learning furniture
- Science facilities
- Industrial machinery facilities (manual arts)
- Home economics and art
- Learning aids
- Classroom screening
Storage furniture
- General school storage
- School bag storage
- Open shelving units, bookcases, cupboards
- Credenzas, mobile pedestals and lockable cabinets
- Filing cabinets and lockers
- Library shelving
Category C
Show moreThis panel provides all additional furniture for major office fit-outs (defined as >100 seats) and associated items. It also allows agencies wishing to purchase additional furniture to match already completed fit-outs. This panel incorporates all the furniture in Panel A.
All furniture proposed for fit-out projects must have a minimum manufacturer’s warranty of 10 years. This does not include soft furnishing.
Make sure to seek certification from contractors that the products offered comply with the 10 year warranty.
Warranties
Show moreWhen purchasing furniture under the CUA, make sure that appropriate warranty certificates are issued. In addition, confirm prior to purchase what is covered under the warranty and procedures involved for making warranty claims. There should not be additional costs (e.g. delivery costs) involved when making a warranty claim.
Assembled or flat pack furniture
Show moreAll deliveries of classroom furniture must be fully assembled – you should not accept flat packs unless you have explicitly stated this in your order. If the contractor wishes to provide the furniture as flat pack, you, the buyer, will decide who is to assemble the furniture and should provide information to the contractor before the contract is finalised.
If you require that the furniture be supplied fully assembled it is the contractor’s responsibility to ensure that it is assembled before delivery, or assembled at your premises at no extra charge. No charge for assembly will apply unless pre pre-agreed in writing.
Online catalogues
Show moreApproved contractors have an online catalogue on their websites from which you can browse their furniture and pricing.
Note that sizes, dimensions, finish, colours and pricing are based on the standard item. Custom sizes, dimensions, finish and colours can be arranged with the contractors directly.
For large purchases, variations to product dimensions, colours and finishes, customers are encouraged to complete the Quotation and Order Form to obtain pricing for suitable products that meet requirements.
What are the buying rules?
Show moreUnder this CUA, the buying process depends on the value of your order:
| Monetary threshold | Buying process |
|---|---|
| Products valued up to $250,000 per order | Panel members may be accessed directly. A unit price must be quoted. |
| Products valued at $250,000 or above per order | Formally request more than one written quotation from relevant panel members. A unit price must be quoted by at least one panel member. |
Other policy requirements
Show moreState agencies should be aware of the following requirements under Western Australian Procurement Rules as they apply to purchases from this CUA. The below table is a summary of the requirements, and State agencies are encouraged to review the WA Procurement Rules.
| Requirement | WA Procurement Rules |
|---|---|
|
Procurement Planning
|
|
| Buyers must prepare a procurement plan and submit it to the State Tenders Review Committee. | No, not when purchasing from this CUA. |
| Buyers must involve the Department of Finance. | No, buyers do not need to involve the Department of Finance when purchasing from this CUA. (WA Procurement Rule C1) |
| Buyers must obtain approval from an authorised officer of the Department of Finance to purchase through an alternative arrangement to this CUA. |
No, the purchase of goods and / or services under the CUA are non-mandatory.. Please note that State agencies are not required to request advice or approval from the Department of Finance, regardless of value, to purchase from an ADE or an Aboriginal Business (WA Procurement Rule C2.2). |
|
Request Development and Contract Formation
|
|
| Buyers must prepare an evaluation report. | No, not when purchasing from this CUA. |
| Buyers must submit an evaluation report to the State Tender Review Committee. | No, not when purchasing from this CUA. |
| Buyers must publish details of their purchase on Tenders WA. | No, not when purchasing from this CUA (WA Procurement Rule D8.1(3)). |
| Buyers must record the purchase on the agency’s contract register, as instructed within the buying agency’s financial management manual. | Yes, for all purchases above $50,000 (WA Procurement Rule F5), unless alternative arrangements have been approved under WA Procurement Rule F5(6). |
|
Contract Management
|
|
| Buyers must prepare a contract management plan. | Contract management or project management plans must be developed for all Procurements with a Total Estimated Value of $5 million and above (WA Procurement Rule E1(1)), unless exempted under WA Procurement Rule E1(2). |
| Buyers must publish details of contract variations on Tenders WA. | No, not when purchasing from this CUA. |
| Buyers must seek advice from the Department of Finance on variations. | No, State agencies do not need to seek advice from the Department of Finance on variations. |
Exemption from using this CUA
This contract is non-mandatory, and as such, buyers do not have to use this CUA.
Sustainability
Show moreHow does this CUA impact on people and planet?
As part of the tender process, contractors on this arrangement have provided details of, and have been evaluated on, the sustainable environmental practises implemented by the organisation. This included a requirement for contractors to only provide products made from legally sourced timber.
Who are the contractors?
Show moreSee the list of approved contractors below, or view the Contractor Comparison Table
Making the most of this contract
Show moreBuying tips:
- Buy from the standard range of furniture and finishes offered as changing finishes and colours can result in significant price increases
- Most categories feature more than one supplier, so get quotes to ensure you are getting what you need for the best available price
- Make sure you have allowed plenty of time for your purchases to be delivered. Rushing an order and requiring shorter lead times may incur extra costs.
What will it cost?
Show morePricing
Pricing can be obtained via the contractors’ websites listed in the contractor profiles at the bottom of this page, or by contacting them directly.
Payment by Purchasing Card
The government Purchasing Card offers a quick and convenient method of payment allowing many goods and services to be efficiently purchased.
Always remember to inform the supplier that you will be paying by government Purchasing Card, at the time of ordering the product or service, and ensure they clearly understand that they must send the tax invoice directly to you, the cardholder.
How do I buy?
Show morePanels A & B
You can Pick and Buy the specified products from the contractor’s catalogue. Evaluate which contractor represents best value for money and directly contact them using the Furniture Quotation and Order Form.
Note that for large volume purchases and/or variations to product dimensions, it is recommended that quotes be obtained from more than one contractor.
When making purchases of furniture, you are encouraged to obtain the best price by making bulk purchases rather than small individual purchases to obtain the best price.
Panel C
Use contractors’ websites to compare prices and products before placing an order. Evaluate which contractor represents best value for money for their needs, then contact the contractor to make your purchase.
Deposits
As per the Request Conditions and General Conditions of Contract (December 2016), buyers are not obliged to pay a deposit for orders made through the CUA.
Placing orders
Most contractors offer a purchasing facility through an online catalogue. Only pre-approved products under this CUA should be made available for online purchasing to Customers. When offering online services under this CUA for the purchase of Products, the contractor must either:
- restrict the site to approved catalogue items under this CUA; or
- must indicate by clear markings on their website the catalogue items that may be purchased under this CUA including government discounts items for non-catalogue items.
Orders are to be placed directly with contractors. Refer to the contractors’ contact details for their preferred contact method for placing orders.
For more information about placing orders, please see the Quotation Form.
After I buy
Show moreDelivery
Delivery is free to any nominated delivery point located within the Perth region including any nominated carrier’s receiving depot where consignment to country areas is involved.
Delivery of furniture includes ‘carry in and place’. The customer will clarify the context of the delivery with the contractor before delivery is made, including any unique site requirements.
Outside of the Perth metropolitan area customers should specify the delivery destination on their order. The contractor must ensure that goods are delivered to the nominated freight contractor.
Where a customer chooses a general carrier requiring palletising and shrink wrapping to handle goods, the extra cost will be borne by the customer and will be quoted and charged on a case-by-case basis. Where a customer requires old furniture to be removed this must be negotiated with the contractor before delivery.
Large quantities of office furniture may be delivered as a flat pack if this is stipulated and agreed with the customer placing the order. Pricing for assembly must be agreed at the time of order if flat pack has been accepted as an alternative.
NOTE: All deliveries of classroom furniture must be fully assembled – no flat packs will be accepted unless negotiated with the Customer.
Contractors
Access Office Industries
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email (preferred), online at www.accessoffice.com.au, fax and phone
Hours: 8.00am to 5.00pm Monday to Friday
Company Features:
Established in 1991, Access Office Industries is an innovative wholly West Australian owned company with 2 factories and warehouses located in Kenwick. Access is a
supplier of high quality steel filing and storage, melamine desks and chairs.
We are certified to ISO14001 and our range of steel storage is certified to GECA 28-2010 v2
Furniture and Fittings – Level A recognition.
APC Storage Technology Pty Ltd
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: online at www.apcoffice.com.au
Hours: 7.00am to 5.00pm Monday to Friday
Company Features:
APC Storage Technology Pty Ltd is a proudly Australian owned business and is one of Australia’s leading manufacturers in office storage systems and warehouse storage solutions.
Arteil Furniture
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email (Preferred) or Online at www.arteil.com.au, fax and phone
Hours:
8:00am to 5:00pm Monday to Thursday
8:00am to 3:00pm Friday
Company Features:
Arteil Furniture are manufacturers of quality office chairs located in O’Connor WA.
Established in 1977 we have supplied WA Government since 1983.
Our showroom is located at 2-5, 95 Garling St O’Connor where all products are on
display for trial. No appointment necessary.
ATAMA Furniture
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email dennis.a@atama.com.au, Phone and Fax
Hours: 8.00am – 5.00pm Monday - Friday
Company Features:
Atama Furniture is a Western Australian owned and operated company which has
been a leading supplier of commercial and healthcare furniture for 26 years.
We manufacture and import a diverse range of commercial furniture and soft
furnishings to suit any application. Our products include lounges, tub chairs, office
seating, educational furniture, auditorium seating, lounge and dining tables, dining
chairs, bedroom furniture, outdoor furniture, curtains, blinds, artwork and more.
Our products have been selected on the principals of quality, durability and ergonomics
whilst ensuring elegant and practical designs at a price that offers sound commercial
value.
Beparta Pty Ltd
Show moreContact details
About us
Supplies: Panel B
Order via email: sales@beparta.com.au
Hours: 9.00am to 5.30pm Monday to Friday
Company Features: Beparta passionately designs furniture and spaces for contemporary learning and working environments. Beparta's aim is simply to facilitate and enhance contemporary learning spaces and environments that encompass a learner focused approach to education and life. Bepartas furniture and environments are creative, innovative and functional.
Castledex
Show moreContact details
About us
About us
Here at Castledex we've been helping create workplace productivity for over fifty years. Castledex was founded in 1968 as a workplace storage and filing systems business. Many of the innovative time- and space-saving solutions common in offices across Australia were introduced by Castledex. Our company has evolved into a full-service provider of FFE (furniture, fit-out and equipment) for workplace productivity solutions. We understand how workplaces function, how people collaborate and that no two organisations function in quite the same way.
We manufacture, partner with and source a range of brands and products for office, education and health spaces around the country and we welcome any opportunity to assist the state government with their requirements.
Orders Via: https://castledex.com.au/products?filter%5B0%5D=cua%3A1
Hours: 8.00am to 4.30pm Monday to Friday
COS - Panel A and B
Show moreContact details
About us
District Australia
Show moreContact details
About us
Supplies:
Panel A
Panel C
Orders Via: Email: cua@district.com.au
Hours: 8.00am to 5.30pm Monday to Friday
Company Features:
The name District represents a distinct place of urban sophistication a catchall for
the best brands found across the globe. A district is a specialised area, a place to go to find answers and discover new solutions. District's mission is to help others make beautiful worlds through its astute understanding of interior spaces by creating its own district of designer possibilities. District is a place where visions come to life. Where the best exclusive, international brands are found. Where clients experience exceptional service and focus always.
DVA Fabrications
Show moreContact details
About us
Supplies:
Panel A
Panel B
Orders Via:
Email (Preferred)
online at www.dvawa.com.au
fax
phone
Hours: 8.00am to 4.00pm Monday to Friday
Company Features:
DVA Fabrications is locally WA owned and operated based north of Joondalup.
Specialising in classroom and library furniture requirements for our WA schools.
Renowned for:
Exceptional customer care and personal service
Custom made educational furniture
Flexibility, style, longevity, quality and cost
Free design and layout service
Ongoing research into new educational trends
ErgoLink
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email sales@ergolink.com.au
Hours:
- 8.30am to 5.00pm Monday to Thursday,
- 8.30am to 4.00pm Friday
Company Features:
Ergolink is a specialist supplier of ergonomic office equipment based in Perth Western Australia. They are a wholly owned and operated Western Australian business with
products being recommended by occupational therapists, ergonomists and physiotherapists since their inception in 1998. They provide a unique mix of ergonomic office products to all sizes of business, government departments and to the general public.
Gregory Commercial Furniture Pty Ltd
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email: support@inventisgregory.com.au
Hours: 9.00am to 5.00pm Monday to Friday
Company Features:
A proudly Australian owned company providing Ergonomic Office and Commercial Furniture Solutions. Gregory Commercial Furniture specialises in creating original and unique ergonomic seat technologies for office chairs. From ergonomic office chairs to visitor seating and lounges, Gregory has the solution for you.
Innerspace
Show moreContact details
About us
Supplies:
Panel A
Panel C
Orders Via:
Email (Preferred) sales@innerspacewa.com.au
online ordering available soon from www.innerspacewa.com.au
Fax
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
Innerspace WA is a privately owned Western Australian company established in 1980. We provide Commercial Furniture products to a broad range of organisations. We add
value to organisations by removing the barriers to innovation, allowing staff to
collaborate, share ideas, feel good, and focus on being productive. We have a dynamic
and experienced team that is committed to providing customer service, product
expertise, project management and financial control to achieve the best possible
outcomes for our customers.
Interia Systems
Show moreContact details
About us
Supplies:
Panel A
Panel C
Orders Via: Website (Preferred), Email rick@interiasystems.com.au
Hours: 8.00am to 5.00pm Monday to Friday
Company Features:
Interia Systems was founded in 1984 with a vision to provide innovated Office Furniture and Office fit outs that offer the ultimate user experience whilst delivering real value for
our customers. As small family-owned business, located at 21 Chisholm Cres Kewdale we are driven by an intense commitment to service and a reputation for quality.
Living Edge
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Website
Hours: 9.00am to 5.30pm Monday to Friday
Company Features:
Living Edge is a 100% Australian owned furniture company with a range comprising
close to four thousand product lines with infinite specification possibilities. Their current
portfolio includes industry-leading workstations, task seating, meeting furniture and
award-winning ABW products.
Office Line
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email (Preferred) sales@officeline.com.au fax and phone
Hours: 7.30am to 5.00pm Monday to Friday
Company Features:
WA owned, established in 1988, renowned supplier of Educational Furniture
and Storage Systems. Our extensive product range makes us truly a “One Stop Shop” for schools.
The products are based on innovative design and best practice and adhere to
international standards relating to sizing, ergonomics and strength.
With a complimentary design and quotation service large warehouse showroom and stock holdings we are able to set the benchmark in customer service and supply.
R and J Plastics
Show moreContact details
About us
Supplies: Panel B
Orders Via: Email: rjplastics@bigpond.com, fax and phone
Hours: 8.00am to 5.00pm Monday to Friday
Company Features:
R and J Plastics is a WA based business that has been supplying quality products to WA government for the last 25 years. All items are manufactured locally including the following:
Plastic play barrels and modular boxes for Early childhood and Pre-primary.
Desk trays, Tote trolley trays and tubs for Primary Schools.
Science lab trays, instrument draining rack systems, cupboard mounted bins and photographic troughs and sinks for Secondary Schools and Tertiary Institutions.
Reed Furniture
Show moreContact details
About us
Supplies: Panel B
Orders Via: Email: sales@reedfurniture.com.au
Hours: 9.00am to 5.30pm Monday to Friday
Company Features: Australia’s premier school furniture designer and supplier. For more than four
decades, Reed Furniture have proudly designed and produced lab, admin, auditorium
and library furniture that meets the specific aesthetic and practical needs of students and staff.
Robinson Group
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email orders@robinsongroup.com.au
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
For over 39 years Robinson Group has been wholesaling commercial furniture and
components to the Australian market, with over 1,000,000 chairs sold in the WA market
alone.
Schiavello Systems Pty Ltd
Show moreContact details
About us
Supplies:
Panel A
Panel C
Orders Via: Email (preferred)
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
Schiavello is a multi-disciplinary company dedicated to developing intelligent, inspiring, ecological and resilient solutions for the office, the home and public spaces.
Schiavello’s concepts and products are developed in Australia by applying a design
process that brings together the company’s core design principles and engineering with
the creativity of local and international designers.
The Schiavello Head Office and manufacturing facilities are integral elements of the
Schiavello Philosophy. They provide the opportunity to develop a rich tapestry of
knowledge that ultimately informs the right solutions and tools for an organisation and its
people.
Shawtec
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email shawtec@iinet.net.au, online at www.shawtec.com.au, fax and phone
Hours: 8.00am to 5.00pm Monday to Friday
Company Features:
Supplying an extensive range of Classroom and Office Furniture.
Products locally manufactured and warehoused in Belmont.
Fast delivery and follow up on all orders and enquiries.
Design service plus custom made products and solutions.
An Environmentally Responsible manufacturing Company.
Online ordering, electronic billing and payments.
Stylecraft Australia
Show moreContact details
About us
Supplies:
Panel A
Panel C
Orders Via: Website
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
Stylecraft has been providing furniture of original, contemporary design for 60 years. First established in Melbourne, Stylecraft is now represented in six showrooms around Australia
together with an office in Singapore. The product offering is suitable for commercial, educational, hospitality and residential spaces and is a collection of Australian designed and manufactured furniture and international brands that they represent on an exclusive basis.
Sylex Ergonomics
Show moreContact details
About us
Supplies: Panel A
Orders Via: Email
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
Sylex Ergonomics has been designing and manufacturing top quality office furniture,
computer furniture and office accessories since the 1970’s. As office technology has become widespread people expect a more integrated approach between office machines and people; they need to work together in a way that is comfortable, productive, and fun.
UCI
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email
Hours: 8.30am to 5.00pm Monday to Friday
Company Features:
UCI offers Australian made workstations, acoustic solutions and commercial furniture that are manufactured at our main facility in Adelaide. We have an in-house Design Studio with Industrial Designers, Mechanical Engineers, and industry specialists, who work to develop new and intelligent products to suit today’s workplace. We also offer a number of exclusive international brands. Working with our international partners brings global experience, products and capability enabling a better workplace experience. The result is a unique offer from both our local manufacturing and global top 5 providing our clients with unparalleled experience and capability.
We have a wide range of furniture for offices, education spaces and healthcare facilities and look forward to helping you with your next project.
Unitec Advanced Systems Pty Ltd
Show moreContact details
About us
Supplies:
Panel A
Orders Via: Email
Hours: 8.30am to 5.00
Company Features:
Unitec Advanced Systems Pty Ltd is a wholly owned Western Australian company located in Perth, Western Australia and specialises only in the manufacture and service
of ergonomic office seating. The company is founded on technical knowledge, research and experience, local and European acquired over 20 years. Office chairs are technology products and
technological knowledge, experience and expertise are crucial in producing a product
of quality, durability and reliability.
WA Library Supplies
Show moreContact details
About us
Supplies:
Panel A
Panel B
Panel C
Orders Via: Email (Preferred), online at www.walib.com.au, fax and phone
Hours: 8.30am to 4.45pm Monday to Friday
Company Features:
WA Library Supplies is a privately owned WA company established in 1976 with a
modern showroom in Osborne Park. Our Services include:
HYDESTOR steel library shelving is the premium product in its field exceeding
Australian standards and including a full 10 year manufacture’s guarantee.
FREE site visit, design, colour coordination and library layout service
Designing custom made furniture for your specific library or classroom needs
Providing quality, competitive classroom and library furniture for WA schools.
Winc - Panel A and B
Show moreContact details
About us
Woods Furniture
Show moreContact details
About us
Supplies:
Panel A
Panel B
Orders Via: Email: sales@woodsfurniture.com.au fax: (03) 1800 776 500 and phone: 1800 004 555
Hours:8.00am to 5.00pm Monday to Friday
Company Features:
Woods Furniture has been manufacturing school furniture since 1953, remaining
Australian owned. We offer an extensive range to strengthen the learning environment
within schools, while ensuring all relevant Australian Standards are met. We provide
flexible, durable and ergonomic furniture backed with a 10-year warranty, developed in
our environmentally conscious manufacturing facility.
